Maintenance - Havso Nikolina 4.0 User Manual

Cleaning and maintenance
1. This product contains no user serviceable parts. Refer service to qualified
service personnel.
2. Before cleaning, unplug the blender and make sure the blades has stopped
completely before you perform any cleaning or maintenance.
3. Always wash immediately after use, for easier cleaning. Do not let food dry on
the jar assembly as this will make cleaning difficult.
4. Pour a little warm soapy water into the jar and turn the knob to "P" position for a
few seconds. And then empty the jar.
5. Dismantle all detachable
parts. Lift the jar assembly
off the motor unit. Detach
the blade assembly by
turning it clockwise from
the jar base bottom, and
remove the sealing ring 2
and blade assembly. Then
also detach the jar cover
and sealing ring 1 from the
jar cover.
6. Rinse the measuring cup, lid, sealing ring 1, jar and sealing ring 2 by hand or in
a dishwasher and then dry. These parts are dishwasher safe components, but
the temperature setting shall not exceed 65 °C.
7. Brush the blade clean by using warm soapy water, then rinse thoroughly under
the tap. Do not touch the sharp blades, handle the blades with care. Do not
immerse the blade assembly in water. Leave to dry upside down away from
children.
8. Wipe the motor unit with a soft damp cloth and dry thoroughly. Remove the
stubborn spots by rubbing with non-abrasive cleanser.
Note: If liquid is spilled into the motor unit; first unplug the unit, then wipe with a
damp cloth and dry thoroughly.
Caution!
– Do not immerse the motor unit in liquid to prevent the risk of electric shock and
damage to the product.
– Do not use rough scouring pads or abrasive cleansers on any parts or the
surface of the unit.

MAINTENANCE

17