4. Operation
Important changes to the freezer settings require sustained button pushes.
This helps prevent accidental changes to the settings during transportation.
Some sequences require a three-second button press and hold while other
sequences require a five-second button press and hold.
For example,
Turning the freezer ON requires a three-second press and hold (two beeps).
Turning the freezer OFF requires a five-second press and hold (three beeps).
The default display is the chamber temperature. Other displays such as Setpoint,
Alarm Postpone, etc., are marked with a letter such as S (Setpoint), h (Alarm
Postpone), etc. These secondary displays revert to the default display after
approximately eight seconds of button inactivity.
4.1 – How to Turn the Freezer On/Off
4.1.1 – To Turn the Freezer On
•
Press and hold the On/Off button for two beeps (~three seconds).
•
The freezer will display a greeting message, and then display the chamber temperature.
4.1.2 – To Turn the Freezer Off
•
Press and hold the On/Off button for three beeps (~five seconds).
•
The freezer will display "OFF" for 10 seconds, and then go dark.
4.2 – Changing the Set Temperature
4.2.1 – To See the Current Set Temperature
•
Press the Set Temp button briefly.
•
The current set temperature will be displayed with the letter S ##.
— After eight seconds of inactivity the display will revert to the current temperature.
4.2.2 – Change the Setpoint to a New Value
•
There are two ways to change the Setpoint.
— Manually adjust the temperature using
— Use one of the three adjustable Preset Buttons.
•
Adjusting the Setpoint manually.
— Because of the importance of the Setpoint Temperature, changing the Setpoint
requires a "two-button procedure". This means:
Method A - press/hold the Set Temp button while simultaneously pressing.
/
Method B - press/hold the Set Temp button until the Set Temp LED glows and
then press
(Methods A and B achieve the same effect. The user can use whichever method
they prefer.)
14 of 28
— OR
/
.
Operating Manual:
/
.
ULT25 NE
10327.1 | 12.22.2016
Need help?
Do you have a question about the Shuttle ULT25NE and is the answer not in the manual?
Questions and answers