Honda F220 Owner's Manual page 18

2. Transmission oil
Place the tiller on a level surface and remove the two screw bolts from
front cover, and remove the front cover (equipped type).
1. Remove the transmission oil level check bolt. The oil should be level
with the lower edge of the oil filler hole.
2. Remove the transmission oil filler cap and add the oil as
recommended for the engine (see page
3. Reinstall oil filler cap and tighten the oil level check bolt securely.
Oil capacity: 0.90 L (0.95 US qt, 0.79 lmp qt)
SCREW BOLTS
TRANSMISSION
OIL LEVEL CHECK BOLT
UPPER LIMIT
(Lower edge of the oil filler hole.)
FRONT COVER
14 ), if the level is low.
TRANSMISSION OIL FILLER CAP
15