Test Tone - Teac AG-D8850 Owner's Manual

Balancing relative volume between speakers
using Test Tone
The test tone function is useful to adjust the relative volume
between speakers.
Once the balance is set, you don't have to change the
balance as long as the speakers aren't moved.
< It is also possible to adjust the relative volume during playback
of DVD.
< Use the remote control from your listening position.
< The TONE button will not work when the SPEAKER ON/OFF
button is set to off. In that case, press the SPEAKER ON/OFF
button to turn the speakers on.
< The TONE button will work when EXTERNAL IN or STEREO is
selected.
1 Press the TONE button.
The test tone is emitted from each speaker in the following
order at 2-second intervals.
Front Left
Subwoofer
< If certain speakers are not being used, (for example, no center
speaker) the noise sequencer will automatically skip over that
channel.
2 Adjust the master volume to the normal listening level.
Center Front Right
Rear Left Rear Right

Test Tone

3
Adjust the volume of each speaker so that the test tone
from each speaker sounds the same.
< Select the channel you want to change the level by pressing
the SELECT buttons (g/t), then adjust the level by pressing
the SELECT buttons (5/b).
< The level can be adjusted in 1 dB steps from –15 dB to +15
dB.
4
When the setting has been finished, press the TONE
button to stop the test tone.
33