NETGEAR GS728TPv2 Hardware Installation Manual page 11

24-Port and 48-Port Gigabit PoE+ Smart Managed Pro Switches with 4 SFP Ports
Table 1. Front panel
Number Description
1 Power LED
2 Fan LED
3 PoE Max LED
4 LED Mode LEDs
5 LED Mode button. This button lets you change the information that the port LEDs provide, which is either
switching information (link, speed, and activity) or PoE information (PoE-powered and PoE fault).
For more information, see
6 Reset button.
For more information, see
7 Factory Defaults button.
For more information, see
8 USB 2.0 port for firmware updates, configuration backups, and memory dumps.
For more information, see
9 24 or 48 LEDs associated with the Ethernet ports. Depending on the position of the LED Mode button, the
LEDs provide either switching information or PoE information.
For more information, see
10 4 LEDs associated with the 4 SFP ports. For each port, the associated LED functions as the combined link
and activity LED.
For more information, see
11 24 or 48 independent 10/100/1000BASE-T RJ-45 PoE ports.
For more information, see
12 4 dedicated SFP ports in which you can install GBICs for fiber or copper connections.
For more information, see
LEDs on page 12.
Reset Button on page 14.
Factory Defaults Button on page 14.
USB Port on page 14.
LEDs on page 12.
LEDs on page 12.
RJ-45 Ports for 10/100/1000M BASE-T Ethernet Connectivity
SFP Ports for Fiber or Copper Connectivity
Hardware Overview
11
For more information, see LEDs
on page 14.
on page 12.
on page 13.