Advertisement
Quick Links
Connecting Diagram - standard
SECURAVIEW MONITOR
2nd CAMERA
(not supplied)
Swann Helpdesk Details
Swann Tech Support
E-mail Support
International e-mail
(We usually reply on the next working day)
Telephone Support
USA
: 877-274-3695 (Toll free Calls to Melbourne Australia)
International:
+61 3 84124610 (Calls to Melbourne Australia)
Swann Tech Support operating hours:
9am - 5.30pm Mon to Fri Australian EST (UTC/GMT+10)
3pm - 11.30pm Sun to Thurs US Pacific Standard Time (UTC/GMT -8)
4pm - 12.30am Sun to Thurs US Mountain Standard Time (UTC/GMT -7)
5pm - 01.30am Sun to Thurs US Central Standard Time (UTC/GMT -6)
6pm - 02.30am Sun to Thurs US Eastern Standard Time (UTC/GMT -5)
Subtract one hour from local US time during Australian Daylight Saving period
(approx Last Sunday of October to last Sunday of March)
Add one hour to local time during Daylight Savings period in the USA when it applies in your region
See http://www.worldtimeserver.com for information on different time zones and the time in Melbourne
Australia compared to your local time.
www.swann.com.au
4
CAMERA
: tech@swann.com.au
SecuraView
Security Monitoring Kit
If this device does not work when you first
plug it in, do not take it back to the store.
Contact the Swann Helpdesk using one of the Toll-Free
numbers shown on the back cover of this booklet.
Most problems can be quickly and easily fixed with a
quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)
Note: Wireless Networks (WiFi) may interfere with and/or experience interference caused by the transmitter
in this unit. Changing the receiver to another channel/frequency or setting the Wireless Network (i.e. Wireless
Access Point) to a frequency further away from the camera's set frequency can alleviate this problem.
Consult the documentation of your Wireless LAN device for information on how to change the transmission
frequency. These cameras work with most wireless camera receivers that support 2414MHz, 2432MHz,
2450MHz and 2468MHz.
INSTALLATION GUIDE
Advertisement
Related Manuals for Swann SecuraView
Summary of Contents for Swann SecuraView
- Page 1 International e-mail : tech@swann.com.au (We usually reply on the next working day) Contact the Swann Helpdesk using one of the Toll-Free Telephone Support numbers shown on the back cover of this booklet. : 877-274-3695 (Toll free Calls to Melbourne Australia)
- Page 2 2. SecuraCam Camera with 18m/60ft A/V cable SecuraView AC/DC Power adaptor 3. 12V Power Supply Make sure you use only the 12Volt DC power supply that was supplied with your SecuraView 4. This Instruction Sheet unit. Use of any unauthorised power supplies may void your warranty.
Need help?
Do you have a question about the SecuraView and is the answer not in the manual?
Questions and answers