Part Identification Chart - Reebok RX7200 RBTL16920 User Manual

Reebok user manual treadmill rbtl16920

Hide thumbs Also See for RX7200 RBTL16920:

User manual (34 pages)

Table Of Contents

Table of Contents

3. (Note: The parts shown in this step may be preassembled

but may need to be adjusted.) With the help of a second

person, raise the Frame (55) and hold it. Insert the Left

Frame Guide (68) into the left side of the Frame. Remove

the Lock Knob (67) from the Lock Pin (72). Make sure that

the Lock Pin Collar (70) and the Spring (69) are on the

Lock Pin. Insert the Lock Pin into the Frame and the Left

Frame Guide. Press the Latch Insert (5) onto the Frame,

with the Lock Pin in the center hole. Tighten the Lock

Knob onto the Lock Pin.

Align the Lock Pin (72) with the hole in the Left Foam Grip

(62) by sliding the Left Frame Guide (68) up or down.

Make sure that the Lock Pin can be inserted fully into the

hole. Hold the Left Frame Guide in place and tighten two

1/2" Screws (10) into the Latch Insert and the Left Frame

Guide. Note: It may be necessary to pull the Lock Knob

(67) to access and tighten the Screws.

4. Raise the treadmill to the storage position (see HOW TO

FOLD THE TREADMILL FOR STORAGE on page 24).

Have a second person hold the treadmill in the upright posi-

tion. Position the U-base (20) against the base of the

Uprights (65) as shown, with the Bumpers (98) under the

U-base. Finger tighten two 2" Bolts (26) with Base

Washers (129) into the base of the Uprights and the U-

base. Then, attach the U-base with two 3" Bolts (23), two

Base Washers (129), and two U-base Nuts (51). Tip the

treadmill forward if necessary. Tighten the two 2" Bolts.

5. Make sure that all parts are properly tightened before

you use the treadmill. Place a mat beneath the tread-

mill to protect the floor. For your benefit, familiarize your-

self with the information on pages 25 and 26.