Appendix 2: Ce Conformance; Ce Declaration Of Conformity - 3D Platform WorkSeries 200 Series User Manual

3D Platform

Appendix 2: CE Conformance

The below declaration states which directives the 3D Platform WorkSeries machines comply to. For a full
test/compliance report, please contact 3D Platform.

CE Declaration of Conformity

Company Name: 3D PLATFORM
Street Address:
P.O. Box 6980
Rockford, Illinois 61125, U.S.A.
Name and address of company Authorized to compile the Technical File
ACC Global Compliance
1877 Kirby Lane
Kyle, Texas 78640, U.S.A
3D PLATFORM declares under our sole responsibility that the equipment described as:
Equipment Name: 3D Printer
Generic Equipment Description: FFF 3D Printer
Model /Type: 200, 300 Series
Serial number(s):
Complies with the requirements of the following European Directives:
•
Machinery Directive 2006/42/EC
•
Low Voltage Directive 2014/35/EU
•
Electromagnetic Compatibility Directive 2014/30/EU
Date: June 29, 2017 At: Roscoe, Illinois USA
Authorized Signature:
Note: This equipment does not fully meet requirements for immunity according to EN61000-4-2. Damage or destruction of the step servo motor embedded
electronic circuits is possible by application of an unusually large electro static discharge (ESD) directly to or in close proximity to the motor.
3dplatform.com • 3DP-DOC-005 (12-2017)
WorkSeries 200, 300 & 400 Manual
ACC – SERVICES CONTACT
105 ROUTE DES POMMIERS
CENTRE UBIDOCA
74670 ST MARTIN BEELEVUE
FRANCE
Revision: C
Date: December 28, 2017
30