3D Printing Materials; Materials; Vendors & Manufacturers; Storage Recommendations - 3D Platform WorkSeries 200 Series User Manual

3D Platform

3D Printing Materials

Materials

The 3D Platform WorkSeries 3D printer uses open
source materials—meaning there are many different
materials and manufacturers that can be used. Here are
a few guidelines when choosing filament:
•
The material diameter to be used will vary based on
the extruder. Refer to the Standard Nozzle
Diameter section for more information.
Vendors & Manufacturers
3D Platform does not limit the filament able to be used
on our printers. We do have some suppliers that we
recommend and sell directly. These materials have been
tested and settings have been developed for these
materials for use on our WorkSeries machines. These
can be found at www.3dplatform.com/filaments.
Some other useful sites are:
•
www.polymaker.com
•
www.3dxtech.com
3dplatform.com • 3DP-DOC-005 (12-2017)
WorkSeries 200, 300 & 400 Manual

Storage Recommendations

Store filament in a cool place. Keep temperatures below
122° F (50° C). Keep material in sealed container or bag
with moisture-absorbing desiccant.

Safety Considerations

Avoid contact with skin and eyes. Avoid dust formation.
Users should be protected from the possibility of
contact with molten material during the printing
process. Use personal protective equipment when
working with heated materials and surfaces.

First Aid

Follow instructions within a specific material's Safety
Data Sheet (SDS, formerly known as "MSDS").
Revision: B
Date: December 28, 2017
23