Kärcher WV 75 plus User Manual page 8

Window vacuum cleaner
Hide thumbs Also See for WV 75 plus:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
appliances. Batteries and accumulators con-
tain substances that must not enter the envi-
ronment. Please dispose of your old
appliances, batteries and accumulators using
appropriate collection systems.
Notes about the ingredients (REACH)
You will find current information about the in-
gredients at:
http://www.karcher.de/de/unternehmen/
umweltschutz/REACH.htm
Start up
Description of the Appliance
When unpacking the product, make sure that
no accessories are missing and that none of
the package contents have been damaged. If
you detect any transport damages please
contact your dealer.
Note: Please refer to page 2 for figures of the
appliance and the operation.
Illustration
1
Charger with charging cable
2
Basic appliance
3
Charging box
4
Charge/operations display
5
Support leg
6
Handle
7
ON/OFF switch for appliance
8
Dirt water reservoir, removable
9
Lock, dirt water reservoir
10 Suction head
11 Release, suction head
12 Attachment with removable lips, wide
13 Attachment with removable lips, narrow
14 Release, attachment
15 Spray bottle
16 Spray lever
17 Wiping attachment
18 Fixating ring
19 Micro-fibre wiping pad
20 Window cleaner concentrate
Assemble the appliance
Illustration
Place the attachment on the suction head
with the removable lips until you hear it
lock in.
8
Note: Depending on the size and accessi-
bility of the surface to be cleaned, use the
corresponding attachment (wide or or nar-
row).
Attach the spray bottle and wiper at-
tachment and fill it with detergent.
Attach the wiping attachment
Illustration
Remove the spray head from the spray
bottle.
Attach the wiper attachment to the spray
head.
Secure the wiper attachment and the
spray head with the fixating ring.
Illustration
Attach the wiper pad to the wiper attach-
ment and secure with Velcro.
Fill the spray bottle
Illustration
Fill the included concentrate (1 x 20 ml)
into the spray bottle and fill the bottle slow-
ly with clear water (makes 250 ml of deter-
gent solution).
Close the bottle.
Charge the battery
Illustration
Insert the charger delivered with the appli-
ance into a proper socket.
Insert the charging cable plug to the back
of the appliance.
Note: During the charging process, the
charge/operating display blinks. Once the
battery is fully charged, it will be perma-
nently illuminated.
Recharge the battery after finishing your
work.
Cleaning without the spray bottle
Apply the detergent as usual according to
manufacturer's instructions and loosen
the dirt.
Illustration
Switch the appliance on, the charge/oper-
ations display will illuminate.
Pull the appliance from the top to the bot-
tom to vacuum up the detergent.
– 2
EN
Start working

Advertisement

Table of Contents
loading

Table of Contents