Advertisement
IMPORTANT NOTES FOR SUCCESSFUL LIGHTING AND OPERATIONAL SAFETY
1.
For safety purposes, this heater model is equipped with a "tip over switch" which will prevent the heater from
operating or being lit if it is bumped, jarred, knocked over or positioned on an angle. In order to light and
operate properly, this heater MUST be placed on a flat horizontal surface in an upright position.
CORRECT POSITION
2.
The tip over switch is interlocked with the
thermocouple.
thermocouple switch must be kept clean and tight at
all times to ensure proper operation of these
components.
3.
While the heater unit does not require a filter, the unit must be kept clean and
the burner and pilot assembly must be kept free of dust and dirt to ensure
optimal and safe operation at all times
Store the unit in a clean environment and make sure that the unit is leak
checked and cleaned before every use. Do not clean the unit with volatile
substances. (see maintenance on Page 3)
The
connections
on
Thermocouple block
Tip over switch
INCORRECT POSITION
the
- 6 -
Advertisement
