Page 1
H1026 Portable Workspace Forced Air Heater INSTALLATION INSTRUCTIONS AND OPERATOR’S MANUAL FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS OR LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE Made in China WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
Page 2
IMPORTANT INSTRUCTIONS PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: 1. Read all instructions before using this heater. 2.
Page 3
IMPORTANT INSTRUCTIONS ALWAYS OBSERVE THESE SAFETY PRECAUTIONS WHEN OPERATING YOUR ELECTRIC HEATER ALWAYS Read all instructions before operating. ALWAYS Locate your electric heater away from furniture or loose hanging drapes. ALWAYS Keep the rear grill away from walls or drapes so as not to block the air intake. (If applicable) ALWAYS Unplug electric heater when not in use.
Page 4
SAVE THESE INSTRUCTIONS IMPORTANT: Read all instructions and warnings carefully before installation and use. Failure to follow these instructions may result in a possible electric shock, injury to persons, fire hazard and will void the warranty. OPERATING INSTRUCTIONS Note: When using the heater for the first time, you may notice a slight emission of smoke. This is normal and will stop after a short time.
Page 5
SAVE THESE INSTRUCTIONS Do not use this appliance if any part of it has been under water. Immediately call a qualified service technician to inspect the appliance and replace any part of the electrical system which has been under water. Grounding Instructions: 1.
Page 6
SPECIFICATIONS Model: H1026 (All specifications +5% / -10% tolerance) BTU’s per/Hour 5120 Voltage 120V Watts 1500 Amps Heating Area (ft²) TROUBLE SHOOTING PROBLEM CAUSE SOLUTION No power to heater Check power connection to heater Desired room Thermostat will shut Do not feel heat or air temperature reached off heater once desired flow...
Need help?
Do you have a question about the MAXX AIR H1026 and is the answer not in the manual?
Questions and answers