Communication
LED status window
PPX:505–9201
Label under
hinged shroud
Power
LED status window
PPX:505–9202
Label under
hinged shroud
Power
To
input
circuit
The three right-most terminals are dedicated to the connection of the
RS–485 communication cable that is connected to the system controller.
Refer to Section 2.5 for communications cable configuration.
Output terminals
Output terminals
Figure 2-4 Terminal Block
Internal External
L
Line +
N
Neutral –
XC
X1
XC
X2
Figure 2-3 Input Wiring
Identification label
Input terminals
Identification label
Input terminals
Communication terminals
Communication terminals
Installing the Module
I003041
a000627
2-5