Preface - Siemens SIMATIC TI505 User Manual

References
Agency Approvals
Telephoning for
Assistance
This manual contains instructions for installing, wiring, and operating the
SIMATIC TI505 Smart Slice Discrete Input/Output (I/O) Module. The
module operates with either the SIMATIC TI560T /TI565T or the
SIMATIC TI545 Programmable Controller.
Refer to the following manuals for instructions on installing, programming,
and troubleshooting your Series 505 equipment.
SIMATIC TI545 System Manual
(PPX:545–8101–x)
SIMATIC TI560T/TI565T System Manual
(PPX:560/565–8105–x)
SIMATIC TI505/TI500 Programming Reference Manual
(PPX:505–8104–x)
SIMATIC TI505 TISOFT User Manual
(PPX:TS505–8101–x)
The Series 505 Smart Slice Discrete I/O module meets the standards of the
following regulatory agencies.
Underwriters Laboratories: UL Listed (Industrial Control Equipment)
Canadian Standards Association: CSA Certified (Process Control
Equipment)
Factory Mutual Approved: Class I, Div 2 Hazardous Locations
Series 505 products have been developed with consideration of the draft
standard of the International Electrotechnical Commission Committee
proposed standard (IEC-65A/WG6) for programmable controllers. Contact
Siemens Industrial Automation, Inc., for a listing of the standards to which
Series 505 complies.
If you need information that is not included in this manual, or if you have
problems using the SIMATIC TI505 Smart Slice, contact your Siemens
Industrial Automation, Inc. distributor or sales office. If you need assistance
in contacting your U.S. sales office, call 1–800–964–4114.

Preface

Preface vii