Inspecting Package - InMotion T3 User Manual

2.5 INSPECTING PACKAGE

Scooterboard contains the following parts for delivery. Open the package
to check whether the following parts are present. If not, contact us on
www.myinmotion.com.
Scooterboard Body
• Utilizing unauthorized parts or failing to correctly assemble the
parts will cause damage to the Scooterboard and even personal
injury. To ensure product quality and user safety, only assemble with
Scooterboard acknowledged parts as specified in this manual.
• Never try to stand on an improperly assembled Scooterboard.
• Never disassemble or modify without instructions from
Scooterboard. Otherwise, irreversible damages and personal injury
may be the result.
2.6 ASSEMBLING SCOOTERBOARD
Step 1
Adjust the handlebar height as
needed. Note that the handlebar
is marked with a safety line which
is not to be exceeded. If the line
is exceeded, the handlebar will be
insufficiently supported and broken,
causing danger to the rider.
Adjust the handlebar according
to the direction in the figure, and
tighten the handlebar using M6
screws. Please pay attention to the
safety line.
Product manual, Warranty
card, and Certificate
Wrench x 1 Charger
Effective
Adjustable
Distance: 3.9"
Reminders:
1. The tension bar cannot
be extended if the
safety line is seen.
2. Lock the buckle before
riding the Scooterboard.
11