CT-CCV6X Intel Atom D2000/N2000 COM Express Type 6 Module
4.4.3.4
Embedded DisplayPort (eDP)
Embedded DisplayPort (eDP) is an embedded version of the DisplayPort
standard oriented towards applications such as notebook and All-In-One PCs.
eDP is supported only on Digital Display Port 1. The resolution is up to
1920x1080 at D2550 CPU and 1366x768 at N2600 CPU.
DP Signal
DP[1:2]_LANE[0:3]+
DP[1:2]_LANE[0:3]-
DP[1:2]_AUX+
DP[1:2]_AUX-
4.5
Chipset
The Platform Controller Hub (PCH) used on CT-CCV6X is Intel NM10. The
PCH provides extensive I/O support with two COM™ Express connectors.
4.6
USB
4.6.1
USB 2.0
The two EHCI Controllers of Intel® NM10 offer eight USB2.0 ports. Each
USB2.0 port supports USB 1.1 and 2.0 compliant devices.
Signal
USB[0:7]+
USB[0:7]-
USB_0_1_OC#
USB_2_3_OC#
USB_4_5_OC#
I/O
Description
Uni-directional main link for the transport of
O
isochronous streams and secondary-data
packets
Half-duplex bi-directional AUX channel for
I/O
services such as link configuration or
maintenance and EDID access
I/O
Description
USB differential pairs, channels 0 through 7
I/O
USB over-current sense, USB 0 and 1. A pull-up
I
for this line shall be present on the Module. An
open drain driver from a USB current monitor on
the Carrier Board may drive this line low. Do not
pull this line high on the Carrier Board.
USB over-current sense, USB 2 and 3. A pull-up
I
for this line shall be present on the Module. An
open drain driver from a USB current monitor on
the Carrier Board may drive this line low. Do not
pull this line high on the Carrier Board.
USB over-current sense, USB 4 and 5. A pull-up
I
for this line shall be present on the Module. An
open drain driver from a USB current monitor on
the Carrier Board may drive this line low. Do not
pull this line high on the Carrier Board.
25