Reebok 51549 Assembly Instructions And Owner's Manual page 11

1/2" Wrenches
25 Remove the Inner Channel (AN) that is
packaged inside the Outer Tube (AO)
before attaching the Handle (AR).
HH01300
GB (2)
Ao
GE (1) 27
Squeeze the Trigger while
inserting the Inner Channel (AN).
Insert the slotted end first.
AN
AN
GH (1)
AN
AR
GB
GB
Ao
Slide the Inner Channel (AN) up to the
10' mark and release the Trigger so it
clicks into place.
Ao
26
Ao
AI
AR
28
Ao
Ao
AI
AN
Wipe off any grease that may be on the Channel (AN) before
attaching the Sticker.The bottom of the Height Sticker (AI)
lines up with the bottom edge of the Inner Channel (AN).
29
GH
AP
Ge
WARNING
Do not overtighten the Cap Nut. If the end of the Bolt
breaks through the plastic cap, call our Customer Service
Department at the number on Page One. Exposed threads
on the end of the Bolt may cause serious injuries such as
those listed on Page One.
AN
11