BenQ LH770 User Manual page 61

FUNCTION
Wired LAN
See
for details.
AMX Device Discovery
Network
Settings When AMX Device Discovery is On, the projector can be detected by
AMX controller.
MAC Address
Displays the mac address for this projector.
Returns all settings to the factory preset values.
Reset All
Settings
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Light Source Mode
Display current light source mode.
Resolution
Shows the supported resolution of the input signal.
Current
3D Format
System Status
Shows the current 3D mode.
Color System
Display the format for entering data into the system: NTSC, PAL, SECAM
or RGB.
Light Source Usage Time
Display time of the light source used.
Firmware Version
Display the separation version of projector.
INFORMATION menu shows the current operation of projector.
DESCRIPTION
"Control the projector via the wired LAN environment" on page 44
The following settings will still remain: Position, Phase, H.
Size, Projector Installation, Language, High Altitude Mode,
Security Settings and Baud Rate.
61