BenQ LH770 User Manual page 56

FUNCTION
Picture Mode
Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
Brilliant Color
Color
Temperature
Color
Temperature
Fine Tuning
3D Color
Management
Reset Picture
Setting
56
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
mode" on page 37 for details.
Selects a picture mode that best suits your need for the image quality and
further fine-tune the image based on the selections listed on the same page
below. See "Setting the User 1 mode" on page 38
Adjusts the brightness of the image. See
for details.
Adjusts the degree of difference between dark and light in the image. See
"Adjusting Contrast" on page 38
Adjusts the color saturation level -- the amount of each color in a video
image. See "Adjusting Color" on page 38
This function is only available when selecting the video or
S-video of the NTSC system.
Adjust red and green tint of image. See
details.
This function is only available when selecting the video or
S-video of the NTSC system.
Adjusts the image to make it look sharper or softer. See
Sharpness" on page 38 for details.
This function is only available when selecting the video or
S-video of the NTSC system.
Adjust the white peak value while ensuring that the color is displayed
correctly. See "Adjusting Brilliant Color" on page 38
See "Selecting a Color Temperature" on page 39
See "Setting a preferred color temperature" on page 39
See "3D Color Management" on page 39
See "Resetting current or all picture modes" on page 40
DESCRIPTION
for details.
"Adjusting Brightness" on page 38
for details.
for details.
"Adjusting Tint" on page 38
for details.
for details.
for details.
"Selecting a picture
for
"Adjusting
for details.
for details.