BenQ LH770 User Manual page 40

2. Press MODE/ENTER and the 3D Color Management page displays.
3. Select Primary Color and press ◄/► to select a color from among Red, Green, Blue, Cyan,
Magenta, or Yellow.
4. Press ▼ to highlight Hue and press ◄/► to select its range. Increase in the range will include colors
consisted of more proportions of its two adjacent colors.
Please refer to the illustration to the right for how the colors
relate to each other.
For example, if you select Red and set its range at 0, only
pure red in the projected picture will be selected. Increasing
its range will include red close to yellow and red close to
magenta.
5. Press ▼ to highlight Saturation and adjust its values to
your preference by pressing ◄/►. Every adjustment made
will reflect to the image immediately.
For example, if you select Red and set its value at 0, only the
saturation of pure red will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less
saturated colors; a setting of "0" removes that color from the image entirely. If the
saturation is too high, that color will be overpowering and unrealistic.
6. Press ▼ to highlight Gain and adjust its values to your preference by pressing ◄/►. The contrast
level of the primary color you select will be affected. Every adjustment made will reflect to the image
immediately.
7. Repeat steps 3 to 6 for other color adjustments.
8. Make sure you have made all of the desired adjustments.
9. Press MENU/EXIT to exit the menu and save the setting.
Resetting current or all picture modes
1. Go to the PICTURE menu and highlight Reset Picture Settings.
2. Press MODE/ENTER and press ▲/▼ to select Current or All.
Current: returns current picture mode to the factory preset settings.
y
All: returns all settings, except User 1 in the PICTURE menu to the factory preset settings.
y
40
Yellow
GREEN
RED
Magenta Cyan
BLUE