Vertical Downflow Installation -
continued
13. Reinstall the cabinet support bracket (Figure 24).
14. Reinstall the plastic wiring ring and route the sensor wires
through the ring (Figure 25).
15. Reinstall the refrigerant pipe support bracket (Figure 26).
16. Reinstall the pipe in and pipe out sensors (Figure 27).
17. Reinstall all front panels. Be sure to use the front panel included
in the downflow kit (Figure 28).
Figure 25: Wiring Ring.
Plastic
Ring
Figure 27: Reinstall Sensors.
Sensors
GENERAL INSTALLATION GUIDELINES
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
Vertical Downflow Installation
Figure 24: Reinstall Support Bracket.
Figure 26: Pipe Support Bracket.
Pipe
Support
Bracket
Figure 28: Reinstall Panels.
Cabinet
Support
Bracket
New
panel
25