Advantech AMT-73 Installation And Operation Manual page 97

Amt-70 series. l-band satellite modem 32k - 40 msymbol bpsk, qpsk, oqpsk, 8psk, 16qam
Table of Contents

Advertisement

Data Rate
tdata yyyyyy
Modulation Type
tmod
BPSK, QPSK, 8PSK,
16QAM, OQPSKI,
OQPSKQ
FEC Code Type
tcode
INTELSAT
DVBS, DSNG,
DVBS2S, DVBS2N,
TPC4K, TPC16K, or
OM73, NONE
Code Rate
trate
1/2, 2/3, 3/4, 5/6, 7/8,
2/5, 3/5, 4/5, 8/9,
19/20, or UNCODED
Reed Solomon
trsrate
Code Rate
OFF, 210, 126
Scrambler
tscram
ON or OFF
Filter Alpha
talpha
0.25 – 0.35 (AMT70)
0.12 – 0.35 (AMT73L)
Spectral Invert
tspinv
ON/OFF
ON or OFF
Input/Output
tinput
Sources
EXTERNAL,
MPEG_VIA_ASI,
MPEG_VIA_EXT
or
INTERNAL_PRB
Differential
tdiff
Encoder/Decoder
ON or OFF
10 MHz Oscillator
tfref
Reference
ON or OFF
Turbo Scrambler
ttpcs
mode
NORMAL or V35
Reset Modem
treset
Software
Parameters
AMT-70/AMT-73/AMT-75 Installation and Operation
rdata yyyyyy
rdem
BPSK, QPSK, 8PSK,
16QAM, OQPSKI
OQPSKQ
rcode
INTELSAT
DVBS, DSNG,
TPC4K, TPC16K,
OM73, NONE
rrate
1/2, 2/3,3/4, 5/6, 7/8,
2/5, 3/5, 4/5, 8/9, 19/20,
or UNCODED
rrsrate
OFF, 210, or 126
rdesc
ON or OFF
ralpha
0.25 or 0.35
or
rspinv
ON, OFF or AUTO
rinput
INPUT1,
INPUT2,
LOOPBACK
rdiff
ON or OFF
rfref
ON or OFF
rtpcs
NORMAL or V35
rreset
Get/Set output or input data rate in Hz
Get / Set the modulator type
Get / Set FEC code type
Define the code type;
(note: the codes OM73 and NONE
are supported only on the DISA
compliant military modem AMT73)
Get / Set the FEC code rate;
The code rate 1/4, 1/3, 9/10 are also
supported in DVB-S2B mode.
Get / Set Reed Solomon code rate
Get / Set the scrambler ON or OFF
Get / Set the Nyquist filter roll-off
Get/Set modulator or demodulator spectral
inversion. If demodulator is set to AUTO, it
automatically senses incoming spectral
inversion and inverts if detected. Only inverts
the modulation eye pattern I and Q.
Get/Set interface sources
(Back panel Input / output ports or loopback)
Get/Set the differential encoder
and decoder to ON or OFF
Get/Set the 10 MHz Reference
ON or OFF; Applies the 10 MHz reference to
the BUC and/or LNB.
Set the compatible Turbo mode
on the modulator / demodulator.
Resets (activate) the modulator or
demodulator pending software parameters
97

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amt-75Amt-70

Table of Contents