Advantech AMT-73 Installation And Operation Manual page 3

2.1 Jan 19, 2005
2.2 Feb 26, 2005
2.3 Mar 20, 2005
2.4 June 20, 2005
2.5 June 30, 2005
2.6 Aug 11, 2005
AMT-70/AMT-73/AMT-75 Installation and Operation
Changed RS-485 pin-out to reverse TX+ & TX-
-
Created Appendix A from previous sections of manual
-
regarding Antenna & cable info
Added Appendix B, (S+N)/N Conversion Charts
-
Added Mod and Demod Fault Status and pin-outs
-
Changed ifrxclock in Packet Protocol section (Chapter
-
12) to read "0=internal; 1=demod (was external)
Updated Front Panel Display Menus
-
Updated Connector section – added reference to AMT-
-
70 and AMT-73L
Changed MONITOR RX POWER.AGC to reflect dB
-
Update Packet Protocol Section 7.3 to
-
Version 1.17Y
Updated Configuration Option Chart to Version 3
-
Inserted new drawings to reflect AMT-70 and 73L front
-
and rear panels
Added paragraphs in Chapter 4 plus simplified block
-
diagram to reflect Clocking, Loopback functions, and
BER testing.
Added paragraph on setting Continuous Carrier Mode
-
Added Appendix B to include Eb/No to (S +N)/N
-
Conversion Charts
Added ¾ Rate eTPC to AMT-70/73 Technical specs.
-
Changed TREF to TFREF in paragraph 2.8 and added
-
support in paragraph 3.2.
Added packet protocol update (Chapter 12).
-
Added AMT-70L/73L Demod Input Level versus Symbol
-
Rate Charts in Appendix A.
Upgraded Packet Protocol to V1.19
-
Removed and incorporated Section 6 with Section 4.
-
Added static DEFAULT Commands
-
Moved Chapter 12 to Chapter 7 – for better flow of the
-
document
Changed Chapter 4 Title to MODEM M&C
-
INTERFACES
Added Quick Start Guide to Chapter 4
-
Reformatted manual.
-
Made correction to several text errors.
-
- New Front-Panel interface design
Commands IFTDINV , IFRDINV. IFBUFMON
-
added for the data interface.
RSPANL new parameter AUTO
-
LOG subsystem enhancements
-
Updated INTERFACE card sections
-
Updated REDUNDANCY chapter
-
RS485CONF, NETCONF new commands
-
Packet Protocol Changes to V1.18
-
- SNMP support added
- AERo Embedded Router support added
3