6. Set up
■ MOUNTING OTHER PARTS
1. Insert the driveshaft into the clutch
drum, then attach the gearbox to the
SE1
shaft tube as aligning the positioning
holes and fasten the screw (A). Fasten
(A)
(B)
the clamp bolt (B) firmly. (SE1)
(A) Screw
(B) Clamp bolt
(B) Tightning Torque:
52~69in-lbs (6~8N.m.)
SE2
2. Install the handle to the shaft tube and
clamp at a position best for your job.
(SE2)
HEZ2650F
U
S
US-9