Xinje XP3-16R Manual page 26


Create a new screen
 To open: choose Menu  Tool  New or directly choose "New"
tool bar.
Method: each screen corresponds with a screen number, it can only be changed when

the screen is created. Screen description is used as a brief introduction or prompt or
Memo, you could also make no description.

Screen Attribute
 To open: Choose "Menu  Tool  Screen Attribute; or directly double-click the screen
in the left column; or directly click
 Method: In this property window, you could change the screen description. Key"∧" and
"∨" are usually used for screen jump. In the screen, if you add key"∧" or key "∨", also
make some corresponding setting, and then in the screen property, these two keys will
be of no use.
XP3 PLC/HMI Hardware Manual
in the top menu.
Page 26 of 42
or click in the
LMAN007_R2V2