Advertisement
6.6.2 KT4 Command
For KT4 command, if settings are changed, the following items will be initialized.
Yes: Initialized
No: Not initialized
Item to be Initialized
SV1 (0001H)
AT bias (0047H)
OUT1 proportional band (0004H)
Scaling high limit (0018H)
Scaling low limit (0019H)
EV1 alarm value (000BH)
Loop bread alarm time (0010H)
Loop bread alarm span (0011H)
EV2 alarm value (000CH)
OUT2 proportional band (0005H)
EV1 alarm hysteresis (0025H)
EV1 alarm delay time (0029H)
EV1 alarm Energized/De-energized (0040H)
EV2 alarm hysteresis (0026H)
EV2 alarm delay time (002AH)
EV2 alarm Energized/De-energized (0041H)
Sensor correction (0015H)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Setting item
to be changed
Input type
Event output
EV1 allocation
(0044H)
(0023H)
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Yes
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
No
No
No
No
No
No
Yes
No
Event output
EV2 allocation
(0024H)
No
No
No
No
No
No
No
No
Yes
No
No
No
No
Yes
Yes
Yes
No
Advertisement
