Part Names And Functions; Part Names And Functions Of The Front Panel - Yamaha HTR-6072 Owner's Manual

Part names and functions

Part names and functions of the front panel

The part names and functions of the front panel are as follows.
z (power) key
1
Turns on/off (standby) the unit.
Standby indicator
2
Lights up when the unit is in standby mode under any of
the following conditions.
• HDMI Control is enabled (p.88)
• Standby Through is enabled (p.88)
• Network Standby is enabled (p.101)
• Bluetooth Standby is enabled (p.103)
YPAO MIC jack
3
For connecting the supplied YPAO microphone (p.33).
Remote control sensor
4
Receives remote control signals (p.7).
1 2 3 4 5 6
YPAO MIC
INFO (WPS) MEMORY
PHONES INPUT
SILENT CINEMA
B C
INFO (WPS) key
5
Selects the information displayed on the front display
(p.47).
Enters the wireless LAN connection setup (WPS button
configuration) by holding down for a few seconds (p.125).
MEMORY key
6
Registers FM/AM radio stations as preset stations (p.52).
Registers Bluetooth, USB, or network content as a shortcut
by holding down for a few seconds (p.65).
PRESET keys
7
Select a preset FM/AM radio station (p.52).
Recall Bluetooth, USB, or network content that is registered
as a shortcut (p.66).
FM and AM keys
8
Switch between FM and AM (p.51).
7 8 9 0
PRESET FM AM TUNING
SCENE
BD
TV NET RADIO
DVD
AUX USB
TONE CONTROL PROGRAM STRAIGHT
(CONNECT)
AUDIO 5V 1A
D E F G H I
10
En
A
DIRECT
VOLUME
J
TUNING keys
9
Select the radio frequency (p.51).
Front display
:
Displays information (p.12).
DIRECT key
A
Enables/disables the direct playback mode (p.41).
PHONES jack
B
For connecting headphones.
INPUT keys
C
Select an input source.
TONE CONTROL key
D
Adjusts the level of high-frequency range (Treble) and low-
frequency range (Bass) individually (p.69).