Franklin Electric IPS Installation & Operation Manual

Operation
Operation
DANGER
• Ensure that all connections are properly torqued and enclosure is closed
prior to applying power to the device.
• Ensure that all connections are properly torqued and enclosure is closed
• Ensure all mechanical equipment operated by the starter is clear for safe
prior to applying power to the device.
operation in case of starter activation.
• Ensure all mechanical equipment operated by the starter is clear for safe
• When in AUTO mode, starter may be activated remotely by the
operation in case of starter activation.
control system
• When in AUTO mode, starter may be activated remotely by the
control system.
Keypad Interface
Keypad Interface
S T P 0 0 . A
5 5 . M 1 0
FLA RESET CLASS
ESC
Operation Modes
ON (HAND)
Press the ON mode button to manually engage motor.
Operation Modes OFF (RESET)
Pressing the OFF mode button manually disengages the motor.
Additionally, the OFF button serves as a manual Reset. Press and
ON (HAND)
hold OFF for 5 seconds to Reset the starter after a fault trip.
Press the ON mode button to manually engage motor.
AUTO
OFF (RESET)
When utilizing AUTO mode, the starter is controlled by a remote
Pressing the OFF mode button manually disengages the motor.
Start/Stop command.
Additionally, the OFF button serves as a manual Reset. Press and
hold OFF for 5 seconds to Reset the starter after a fault trip. LED Status Indicators
AUTO
MODE LEDs
When utilizing AUTO mode, the starter is controlled by a remote
Illuminates with corresponding mode selection (HAND/OFF/AUTO).
Start/Stop command. Flashing mode LED signals a fault trip during the last operating
mode. All 3 mode LEDs will flash simultaneously during Shutdown or
Fireman's Override operation.
LED Status Indicators
RUN LED
MODE LEDs
Illuminates when starter is given a Run signal and proof of power is
Illuminates with corresponding mode selection (HAND/OFF/AUTO).
detected. LED will flash when Run signal is present without proof of
Flashing mode LED signals a fault trip during the last operating
power to the motor.
FAULT LED
Fireman's Override operation.
Illuminates upon a fault condition or overload trip. Starter must be
returned to the OFF mode in order to Reset. A 180 second minimum
RUN LED
cool down period must elapse prior to further operation.
Illuminates when starter is given a Run signal and proof of power is
power to the motor.
FAULT LED
Illuminates upon a fault condition or overload trip. Starter must be
returned to the OFF mode in order to Reset. A 180 second minimum
cool down period must elapse prior to further operation.
Lockout Settings & Overload Adjustment
DANGER
any of the protective functions of the IPS starter, the settings must
S T P 0 0
5 5 .
S E T T N
S T P 0 0 . A
5 5 . M 1 0
L O C K
FLA RESET CLASS
ESC
ESC
ESC
S E T T N
U L C N
S T P 0 0
5 5 .
Adjustments may now be made to the Overload FLA setting and
Ground Fault Level setting. The lockout feature will automatically
re-enable itself after 2 minutes.
Overload Adjustment (Setting Range 1.0 - 95.0 Amps)
S T P 0 0 . A S T P 0 0
5 5 . M 1 0 1 0 .
E D I T
S E T T N I G S
L O C K E D F L A
S E T T N I G S
U L C N K D
ESC
S T P 0 0 . A
5 5 . M 1 0
Product improvement is a continual process. Franklin Electric, Mira,
Orion and associated logos are trademarks of Franklin Electric.
All sales subject to Franklin Electric Terms & Conditions.
Lockout Settings & Overload Adjustment
The IPS Starter is pre-configured to protect the motor based on
customer selected specification. If adjustments need to be made to
any of the protective functions of the IPS starter, the settings must
first be unlocked. To unlock the IPS settings, follow the steps below.
Default Display Screen
S T P 0 0 . A S T P 0 0
Default Display Screen
. A S T P 0 0 . A
5 5 . M 1 0 1 0 .
M 1 0 1 0 . M 1 0
Press and hold the UP and DOWN buttons for
2 seconds until the display screen matches the
Press and hold the UP and DOWN buttons for
display at left.
2 seconds until the display screen matches the
E D I T
S E T T N I G S
display at left.
L O C K E D
F L A
E D I T
I G S
Press the ENTER button to change the menu
E D .
F L A 1 0 A
from "LOCKED" to "UNLOCKED."
Press the ENTER button to change the menu
S E T T N I G S
from "LOCKED" to "UNLOCKED."
U L C N K D
I G S
The lockout feature is now disabled.Press the
or
ESC key to return to the Default
ESC
K D
Display screen.
S T P 0 0 . A
The lockout feature is now disabled. Press the
ESC key to return to the Default
ESC 5 5 . M 1 0
Display screen.
. A
Adjustments may now be made to the Overload FLA setting and
ESC
M 1 0
Ground Fault Level setting. The lockout feature will automatically
re-enable itself after 2 minutes.
Overload Adjustment (Setting Range 1.0 - 95.0 Amps)
A A
S T P 0 0 . S T P 0 0 .
Once settings are unlocked, follow the steps
below to adjust overload setting.
5 5 . M 1 0 1 0 . M 1 0
Press the DOWN arrow once.
. A
Once settings are unlocked, follow the steps
below to adjust overload setting.
S E T T N I G S E D I T
M 1 0
Edit FLA Screen
L O C K E D F L A .
1 0 A
Press the DOWN arrow once.
Press ENTER
Edit FLA Screen
S E T T N I G S
Use the UP and DOWN keys to make
. or
1 0 A
U L C N K D
adjustments.
Press ENTER
ESC Press ENTER to save setting.
S T P 0 0 . A
Use the UP and DOWN keys to make
Press ESC to return to the Default
or
ESC
5 5 . M 1 0
adjustments. Display screen.
Press ENTER to save setting.
Product improvement is a continual process. Cerus, Mira, Orion
and associated logos are trademarks of Cerus Industrial Corp.
All sales subject to Cerus Terms & Conditions.
Press ESC to return to the Default
ESC
Display screen.
800.962.3787 |
Installation & Operation
. A
M 1 0
This is a condensed version of the full manual.
The complete manual is available for download
This is a condensed version of the full manual.
at www.cerusind.com or call 800.962.3787.
The complete manual is available for download
at www.franklin-electric.com. Precautions
.
1 0 A
Precautions
To prevent injury and property damage, follow these instructions
Failure to adhere to installation/operation procedures and all
applicable codes may result in hazards as indicated by warning
To prevent injury and property damage, follow these instructions.
codes outlined below:
Failure to adhere to installation/operation procedures and all
applicable codes may result in hazards as indicated by warning
or
codes outlined below:
indicates an imminently hazardous situation which, if not avoided, w
DANGER result in death or serious injury. This signal word is to be limited to th
most extreme situations.
ESC Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury. This signal word is to be limited to the
most extreme situations.
indicates a potentially hazardous situation which, if not avoided, cou
result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
indicates a potentially hazardous situation which, if not avoided, ma
result in minor or moderate injury. It may also be used to alert again
unsafe practices.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury. It may also be used to alert against
This is the safety alert symbol. Read and follow instructions caref
unsafe practices.
avoid a dangerous situation.
This symbol alerts the user to the presence of "dangerous volt
This is the safety alert symbol. Read and follow instructions carefully to
inside the product that might cause harm or electrical shock.
avoid a dangerous situation.
Safety Instructions
This symbol alerts the user to the presence of "dangerous voltage"
inside the product that might cause harm or electrical shock.
Equipment can start automatically. Lockout/tagout before servicing.
Safety Instructions
As with all electrical products, read manual thoroughly. Only quali
expert personnel should perform maintenance and installation. Contac
DANGER
nearest authorized service facility for examination, repair, or adjustm
Do not disassemble or repair unit unless described in this manual; d
Equipment can start automatically. Lockout/tagout before servicing. or injury to electrical shock or fire hazard may result. Specifications
manual data subject to change. Consult factory for additional informat
www.cerusind.com
CAUTION
expert personnel should perform maintenance and installation. Contact the
nearest authorized service facility for examination, repair, or adjustment.
Do not disassemble or repair unit unless described in this manual; death
manual data subject to change. Consult factory for additional information.



Installation & Operati
DANGER
WARNING
CAUTION
DANGER
CAUTION