Installation On An Excisting Floor Or Foundation - Electrolux W475N Installation Manual

14

Installation on an excisting floor or foundation

Instead of braking up the excisting floor or foun-
dation, chemical bolts M16 can be used. A set
of four HILTI HVU bolts can be ordered from our
Spares Dept, part No. 471 6699-64.
Mounting instruction
• Drill ø 18 mm (11/16") to a depth of 125 mm
5
(5"). Do not make the hole too deep.
• Clean the drilled holes.
6
• Put down the chemical ampule in the hole.
7
• Rotate the bolt into the hole, so that the glass
8
ampule is broken and its contents mixed.
• Rotate the bolt to correct depth.
9
NOTE! Do not rotate the bolt against the con-
crete bottom. Check that the chemicals have
filled the hole completely.
• Remove the drilling machine with the moun-
10
ting tool. Hold the bolt with one hand. Let the
bolt harden before the machine is mounted.
Time for hardening, due to different concrete
temperatures.
– 10°C 6 hours
– 5°C 2.5 hours
± 0°C 1 hour
5°C 0 minutes
10°C 20 minutes
15°C 15 minutes
20°C 10 minutes
Installation
5
6
7
8
9
10
5917
5918
5919
5920
5921
5922