Phonak Roger Select User Manual page 37

B. Briefly pressing the on/off button will put your Roger
microphone into Bluetooth standby mode. This means
your Roger microphone microphone is switched off
but you can still receive an incoming phone call.
In Bluetooth standby mode, the battery of your Roger
microphone is drained. It is recommended to switch
off your Roger microphone completely if you are not
expecting to make phone calls.
Disabling / Enabling Bluetooth
If you are not using your Roger microphone's Bluetooth
function for a long time, you can disable Bluetooth by
pressing and holding the Bluetooth button
seconds until the blue back indicator light fades off.
To re-activate Bluetooth, press and hold the Bluetooth
button for two seconds until the blue back indicator
light fades on.
for two
37