Connect The Transmitter; Power The Transmitter; Connect To An Audio Source; Connecting To A Television - Advent AW820 Installation And Operating Instructions Manual

CONNECT THE TRANSMITTER
Connect the transmitter as follows:
_1
Power the Transmitter
1. Insert the power cord from AC Adapter (0) into the
Transmitter Power Input Jack (I).
2. Plug the AC adapter into a nearby, standard wall
outlet.
Note: Be sure to use the AC adapter rated 18V DC 150 rnA.
Transmitter Power
Input Jack
(I)
~jJ
Transmitter AC
Adapter (0)
.:;;
!*~ rn~
OU:-.
~
""
Dual RCA Cable (R)
Tr«t........ r
~
l/R Audio
Input Jacks
(L,
M)
SIll
2
Connect to an Audio Source
WARNING:
DO NOT connect the Dual RCA cables to a
. .aker output
on the audio source. If you use the
speaker output of an audio source to connect the
transmitter,
you will pennanently damage the
tlMSmitter.
It is only designed to work with RCA-type
line/variable outputs or headphone outputs only.
OPTION 1
CONNECTING TO A STEREO RECEIVER _
1. Connect one end ofthe color-coded Dual RCA
~'.!.t!
Cable (R) to the color-coded Left/Right Audio
Input Jacks (L, M) on the transmitter.
:::z::=;:foI
2. Connect the other end of the Dual RCA Cable
l/R Audio Dual RCA Cable (R)
to the RCA-type audio outputs of a stereo
Input Jacks
(L,
M)
receiver/ amp or other audio source.
l/R Audio Dual RCA
Input Jacks (L, M) Cable (R)
5