Service And Repairs - DeWalt DCE089G User Manual

The Laser Beams Flash
The lasers are designed to self-level up to an average of
4° in all directions If the laser is tilted so much that the
internal mechanism cannot level itself, the laser beams will
flash indicating that the tilt range has been exceeded. THE
FLASHING BEAMS CREATED BY THE LASER ARE NOT
LEVEL OR PLUMB AND SHOULD NOT BE USED FOR
DETERMINING OR MARKING LEVEL OR PLUMB. Try
repositioning the laser on a more level surface.
The Laser Beams Will Not Stop Moving
The laser is a precision instrument. Therefore, if it is not
positioned on a stable (and motionless) surface, the laser will
continue to try to find level. If the beam will not stop moving, try
placing the laser on a more stable surface. Also, try to make
sure that the surface is relatively flat, so that the laser is stable.
The Battery Meter Leds Flash
When all 4 LEDs continuously flash on the Battery Meter
this indicates that the unit has not been fully powered off using
the Pendulum Lock switch
B
should always be placed in the LOCKED/OFF position when the
laser is not in use.
Accessories
WARNING:
Since accessories, other than those offered by
DeWalt, have not been tested with this product,
use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only DeWalt
recommended accessories should be used with this
product.
Using the Laser with Accessories
(See Figure ), inset)
2
The laser is equipped with both 1/4 - 20 and 5/8 - 11 female
threads (I) on the bottom of the unit. This thread is to
accommodate current or future DeWALT accessories. Only use
DeWALT accessories specified for use with this product. Follow
the directions included with the accessory.
. The Pendulum Lock switch

Service and Repairs

• Note: Disassembling the laser level(s) will void all
warranties on the product.
To assure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed by
authorized service centers. Service or maintenance performed
by unqualified personnel may result in a risk of injury. To locate
your nearest DeWALT service center go to www.2helpU.com
on the Internet.
1 Year Limited Warranty
DeWalt will repair, without charge, any defects due to faulty
materials or workmanship for one year from the date of
purchase. This warranty does not cover part failure due to
normal wear or tool abuse. For further detail of warranty
coverage and warranty repair information, visit www.dewalt.
com. This warranty does not apply to accessories or damage
caused where repairs have been made or attempted by others.
This warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
In addition to the warranty, DeWALT tools are covered by our:
1 Year Free Service
DeWalt will maintain the tool and replace worn parts caused by
normal use, free, any time during the first year after purchase.
30 DAY no risk
satisfaction GUARANTEE
If you are not completely satisfied with the performance of your
DeWalt Laser, for any reason, you can return it within 30 days
from the date of purchase with a receipt for a full refund – no
questions asked.
Free Warning Label Replacement:
If your warning labels become illegible or are missing, visit
1
www.dewalt.com for a free replacement.
GB
13