Table of Contents
Advertisement
Recording
Timer Recording
You can set up as many as eight timer recording programs.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 2 to display the TIMER RECORDINGS menu.
3. Select 1 to create a New Program.
How often should this
program record?
1 One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
0 Cancel
4. Select how often you want the program to record.
5. Enter the data for the program with the number
buttons.
The data includes the channel number (press INPUT to
select the line input), start time including AM or PM,
and end time. The start date is automatically entered
based on the VCR clock. Both the date and speed can
be changed.
Timer Recording Information
The clock must be set correctly.
Insert a tape with the safety tab in
place and enough tape to record
the program.
The output of your cable box appears
in the Channel item of the timer
recording menu if you've set up the
VCR for a cable box for all channels.
PROGRAMS OVERLAP appears if you
have entered two programs where
the times overlap.
TIMER appears in the display when
you turn off the VCR and a timer
recording has been set. TAPE flashes
if there is no tape in the VCR.
For cable box or satellite receiver,
turn it on and tune it to the channel
you want to record before the
recording is to begin.
(Continues on Next Page)
33
Advertisement
Table of Contents
