Connections
TV With Audio/Video Jacks and Cable
Box to Unscramble Pay Channels
Only
This connection assumes:
•
You are using a cable box only to unscramble premium
channels.
•
Your TV has audio/video input jacks.
This connection provides:
•
Stereo sound playback from VCR.
•
Recording a scrambled or unscrambled channel through
the cable box while watching an unscrambled channel.
To use this connection, you must have:
•
(3) coaxial cables
•
(3) audio/video cables
•
(1) splitter
If your cable box is remote controllable:
•
Position it above the VCR as shown. Make sure not to
block any of the VCR's ventilation holes.
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
•
Tune your TV to its video input channel.
•
Use of TV•VCR button is not required.
•
Use of TV•VCR button is not required. Set the Auto
TV/VCR feature to "OFF."
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record a scrambled or unscrambled program
and watch another unscrambled program:
1. Begin recording a scrambled or unscrambled program
through the cable box using one of the recording
features.
2. Select an unscrambled channel on the TV.
64
Position Remote-Controllable
Cable Box
VCR
CABLE BOX
All scrambled channels must be
viewed through the VCR.
For Cable Box Setup, select ALL
channels. See page 11.
CABLE
2-WAY
SPLITTER
CABLE BOX
VCR
AUDIO
OUT
IN
VIDEO
TV
VIDEO
VIDEO
R
INPUT 1
INPUT 2
R
R
L/MONO
L/MONO
L
S-VIDEO
AUDIO
OUTPUT
TRANSMITTER
VCR'S
SIGNAL
IN
OUT
ANT. IN
R
L
RF OUT
CH.
3
4
CABLE/
ANTENNA