Table of Contents
Advertisement
Connections
TV With RF Jack Only
This connection assumes:
•
You are connecting antenna, cable, or cable box
system.
•
Your television has only an RF input jack.
This connection provides:
•
Mono sound playback from VCR.
•
Record one channel while watching another (except
when using a cable box for all channels).
To use this connection, you must have:
•
(1) coaxial cable for cable or antenna connection; (2)
for cable box
If your cable box is remote controllable:
•
Position it above the VCR as shown. Make sure not
to block any of the VCR's ventilation holes.
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
•
Tune your TV to channel 3 or 4, whichever one you
selected with the CH. 3/4 switch on the back of the
VCR.
•
Set the Auto TV/VCR feature to "ON."
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record one program and watch another:
1. Begin recording a program using one of the
recording features.
2. Press the TV•VCR button and select a different
channel on the TV.
62
Position Remote-Controllable
Cable Box
VCR
CABLE BOX
CABLE, CABLE BOX, OR ANTENNA
VCR
AUDIO
OUT
VIDEO
TV
TRANSMITTER
VCR'S
SIGNAL
ANT. IN
R
L
RF OUT
IN
CH.
3
4
CABLE/
ANTENNA
Advertisement
Table of Contents
