Desktop Charger; Low Battery Alert - Maxcom MM35D User Manual

If the process of charging is complete, there will be a
message on the display „Battery fully charged", and the
battery icon will stop blinking.
D
ESKTOP
In case of using a desktop charger, first you need to connect
the charger with a desktop charger, and then plug it into a
power outlet. To charge the battery, all you need to do is to
place the phone on the desktop charger with contact pins
downwards.
Important:
o
Prior to charging make sure the battery is installed
correctly
Never remove the battery while charging – you
o
might damage the phone
o
If the voltage is too low for the phone to work
properly, a warning message will appear on the
display that the phone will be automatically
switched off, and the phone will be switched off.
o
If the battery is deeply discharged, it might take up
to several minutes for the message to appear after
the charger is plugged in.
o
If the phone was not used for a long time, the
battery might be so called "deeply discharged"; to
recover a deeply charged battery you should leave
the battery connected although there is no
message on the display. It might take up to an hour
for the message to appear.
L B
OW ATTERY
The phone will beep (if warning alerts are enabled in profile)
and a message „Battery discharged" will appear on the
C
HARGER
A
LERT
13