Lenovo ThinkAgile HX2320-E Product Manual page 16

Rack installation
The HX Series Express appliances and enclosures ship with a rail kit. The following table lists the rail kit
options that are available for selection.
Table 18. Rail kit selection options
Description
ThinkSystem Tool-less Slide Rail
ThinkSystem Tool-less Slide Rail Kit with 1U CMA
ThinkSystem D2 Slide Rail
ThinkSystem D2 CMA (Cable Management Arm)
The following table summarizes the features of the rail kits that are available for selection.
Table 19. Rail kit features and specifications summary
Feature
CMA
Rail length
Rail type
Tool-less installation
In-rack maintenance
1U PDU support
0U PDU support
Rack type
Mounting holes
Mounting flange thickness
Distance between front
and rear mounting flanges^
* If a 0U PDU is used, the rack cabinet must be at least 1100 mm (43.31 in.) deep if no CMA is used, or at least 1200 mm
(47.24 in.) deep if a CMA is used.
^ Measured when mounted on the rack, from the front surface of the front mounting flange to the rear most point of the rail.
Hypervisors
Lenovo ThinkAgile HX2320-E and HX2720-E Appliances
Tool-less Slide Rail (HX2320-E)
Without 1U CMA With 1U CMA
Not included Included
730 mm (28.74 in.) 807 mm (31.8 in.)
Full-out slide (ball bearing)
Yes
Yes
Yes
Limited*
IBM and Lenovo 4-post,
IEC standard-compliant
Square or round
2 mm (0.08 in.) – 3.3 mm (0.13 in.)
609.6 mm (24 in.) – 863.6 mm (34 in.)
Quantity
1
1
1
1
D2 Slide Rail with CMA
(HX Series Enclosure)
Included
853 mm (33.58 in.)
Full-out slide (ball bearing)
Yes
Yes
Yes
No
IBM and Lenovo 4-post,
IEC standard-compliant
Square or round
2 mm (0.08 in.) – 3.3 mm (0.13 in.)
609.6 mm (24 in.) – 812.8 mm (32 in.)
Y N
Y N
N Y
N Y
16