Cable Connections - Current LOOP 1690 Quick Start Manual

Cable Connections

12V DC Power
LED Light #1
LED Light #2
Temperature
USB Port
Expansion
USB Port
microUSB Ports
DC Flow Pumps
(or LOOP Hubs)
24V DC Power
Wave Pump #1
Wave Pump #2
Wave Pump #3
(or Accessory Pump)
Connecting DC Flow Pumps
NOTE: Ensure your DC Pump HUB is
Bluetooth compatible. The HUB label will
have a Bluetooth® icon as shown here:
If your HUB does not have this icon,
please contact us for a compatible
HUB at 760-727-7011 or email us
at info@current-usa.com.
6. Place temperature sensor into aquarium or
filter sump and attach using suction cup.
7. Connect temperature sensor to Temperature
USB port on controller.
8. Connect LED lighting 12V DC power supplies
into LED Light #1 and #2 power ports.
9. Connect Wave Pump 24V DC power supplies
into Wave Pump #1, #2 and/or #3 power ports.
10. Plug all power supplies into a GFCI outlet
and ensure a drip loop is in place.
Controller Key Ring will illuminate Blue, indicating
power is now ON.
Icon
DC Flow
Pump #1
Control Key Ring
Port #4
Port #1
Connect DC pump HUB(s) to controller
using microUSB cables as shown.
For detailed instructions, visit current-usa.com
DC Flow
Pump #2
Port #1