Installing Controller - Current LOOP 1690 Quick Start Manual

Installing Controller

1. Find a mounting location for the controller, ensuring it is in a dry place
away from splashing or dripping water.
2. Clean mounting location of any dirt or
debris using a wet rag.
3. Place controller into clear cover and snap
cover closed. Attach controller to stand
using the velcro strips (included).
WARNING - DO NOT expose controller to moisture, water
or salt creep.
DO NOT USE WITH LOOP IR
CONTROLLER OR REMOTE.
Controller Operation & Lock Feature
The controller Key Ring displays the status of your controller. There are
currently four indicators/features using the Key Ring:
Control Key Ring
BLUE - Indicates normal operation. Press once to reset Bluetooth.
RED - Voltage issue. Ensure 12 & 24V DC power is connected correctly.
GREEN - LOCK feature, locks the controller settings and prevents
other mobile devices from connecting to controller. Press and hold key
for 5 seconds to lock settings, press and hold for 5 seconds to unlock.
PURPLE Blinking - Manual Mode/Reset. Press for and hold for 10
seconds to put controller into manual ON mode (lights & pumps will go
into default mode). Connect to mobile device to exit Manual Mode.