Current Mini LOOP BT Quick Start Manual

WHAT'S INCLUDED
Each Mini LOOP BT Controller includes:
Item Description
A LOOP Mini Controller w/Bluetooth
B Temperature Sensor
C 3M Adhesive
D Mounting Bracket
E Wood Screws
IMPORTANT: If you are missing anycomponents,
do not contact your retailer. Please contact us at:
www.current-usa.com/warranty
IMPORTANT - BEFORE INSTALLATION
Unplug all power to any existing LOOP products.
DO NOT expose controller to moisture, water or salt creep.
DO NOT use with LOOP IR Controller or Remote (they are not compatible)
When connecting LOOP products to controller, gently slide connector in and tighten.
Do not twist or rotate. Excessive force can damage pin connections.
MOUNTING INSTRUCTIONS
1. Remove controller and all components from packaging.
2. Locate a mounting position for controller, ensuring it is in a dry
place away from water splashing, salt creep or dripping water.
3. Clean mounting location of any dirt or debris using a damp rag.
4. Attach Controller mount to cabinet using either 2 wood screws
or 3M Adhesive (included).
CABLE CONNECTIONS
1. Connect LED light to Mini BT controller by gently
pushing into top 3-pin connector and tightening.
2. Place temperature sensor into sump or aquarium
and attach using suction cup.
3. Connect Temperature sensor to Temperature USB
port on bottom of controller.
4. Attach controller to cabinet by sliding vertically into
mounting bracket.
MINI BT CONTROLLER
Quantity
DC12V
1
1
1
1
2
A
TEMP
DC12V
Slide into Bracket
Quick Start Guide
D
B
LED Light Connector
LED Light
12V DC
Connector
Power
Temperature
Sensor
TEMP
microUSB
HUB Connections
C
E
r
TOP
BOTTOM