Table of Contents
Advertisement
User Guide
Lantern number
14
15
16
1 (reversed in X direction)
2 (reversed in X direction)
3 (reversed in X direction)
4 (reversed in X direction)
5 (reversed in X direction)
6 (reversed in X direction)
7 (reversed in X direction)
8 (reversed in X direction)
9 (reversed in X direction)
10 (reversed in X direction) 77
11 (reversed in X direction) 85
12 (reversed in X direction) 93
13 (reversed in X direction) 101
14 (reversed in X direction) 109
15 (reversed in X direction) 117
16 (reversed in X direction) 125
If the lantern has switches labelled "1", "2" or "128", set
these to OFF. Switch 4 reverses the X-direction movement. This
allows the joystick to work in the most logical fashion, depending
on whether the lanterns are facing towards or away from the
controller. Predators and later IQ250/IQ500 have an extra x-
reverse switch. For these lanterns set the "4" switch to OFF.
The IQ-MX80 only outputs the first 128 DMX channels. A
lantern with its DMX address set to a number greater than 128
will not function.
Up to 32 lanterns may be connected to the IQ-MX80.
Lanterns assigned to the same channel will perform identically.
The total length of DMX cable run should not exceed 250m
© N.J.D. Electronics 1997
DMX
Switches ON
start address (other switches off)
105
64, 32, 8
113
64, 32, 16
121
64, 32, 16, 8
5
4
13
8, 4
21
16, 4
29
16, 8, 4
37
32, 4
45
32, 8, 4
53
32, 16, 4
61
32, 16, 8, 4
69
64, 4
64, 8, 4
64, 16, 4
64, 16, 8, 4
64, 32, 4
64, 32, 8, 4
64, 32, 16, 4
64, 32, 16, 8, 4
IQ-MX80
-Page 4-
Advertisement
Table of Contents
