User Guide
DMX and audio inputs and live, if the equipment has passed the
live-earth test.
Do not test high-voltage or earth bonding between DMX or
audio inputs and earth - this will destroy the electronics.
Setting the DMX address switches.
The DMX switches on the lantern should be set as shown.
If your lantern has a 3-digit LED display, set the display to the
number in the "DMX start address" column, and set the operating
F 1
mode to "
" or "
movement. This allows the joystick to work in the most logical
fashion, depending on whether the lanterns are facing towards or
away from the controller).
If it has DIL switches, refer to the "switches ON" column. If
there are also switches labelled "MODE" (e.g. Spectre) set them
to the "IQ-MX80" setting
Note: The switch numbers refer to the numbers printed on
the product label adjacent to the switch, not to the numbers on
the switch itself.
Lantern number
1
2
3
4
5
6
7
8
9
10
11
12
13
© N.J.D. Electronics 1997
F 3
F 3
" (
reverses the left-right joystick
DMX
start address (other switches off)
1
9
17
25
33
41
49
57
65
73
81
89
97
IQ-MX80
Switches ON
None
8
16
16, 8
32
32, 8
32, 16
32, 16, 8
64
64, 8
64, 16
64, 16, 8
64, 32
. . .continued overleaf
-Page 3-