Rebooting A Multi Services Platform Series Device By Using The Ipmi - Cisco CPS-MSP-1RU-K9 User Manual

Rebooting a Multi Services Platform Series Device by using the IPMI

h.
i.
On a PC that has access to the network on which the Multiservices Platform Series that you want to
Step 4
reboot is configured, start Internet Explorer 8, enter the IPMI IP address in the Address field, and press
the Enter key.
Use the IPMI IP address that you noted earlier in this procedure.
The IPMI log in screen appears.
In the IPMI log in screen, take these actions:
Step 5
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
Rebooting a Multi Services Platform Series Device by using the
IPMI
This section explains how to remotely reboot a Multiservices Platform Series by using the IPMI.
Before you Begin
•
•
•
•
Cisco Physical Security Multiservices Platform Series User Guide
F-2
Press the F10 key to save your changes and exit the BIOS Setup Utility.
Choose Ok to confirm.
The server reboots.
Enter ADMIN (all capital letters) in the Username and Password fields.
Click Login.
The System Information page appears.
Choose the Configuration tab.
Click Users.
Locate the line that displays ADMIN in the User Name column, and click this line to highlight it.
Click Modify User.
Enter a password in the Password field and the Confirm Password field.
The password must contain at least eight characters and is case sensitive. You need this password
when you use the IPMI to reboot the server.
Click Modify.
In the confirmation pop-up window, click OK.
Exit the browser.
On the PC that you will use to reboot the server, download and install the current version of Java by
going to the java.com website and following the instructions provided there
Make sure that the server that you want to reboot is configured in the
Services Platform Device" section on page F-1
Make sure that you have the IPMI IP address that you noted when you configured the Multiservices
Platform Series as described in the
on page F-1
Make sure that you have the password for the IPMI that you set as described in the
on Multi Services Platform Device" section on page F-1
Appendix F Using IPMI to Remotely Reboot a Multi Services Platform Series Device
"Setting Up IPMI on Multi Services Platform Device" section
"Setting Up IPMI on Multi
"Setting Up IPMI
OL-21838-03