Vacon NX Series Applications Manual page 131

apfiff09 marine
P2.5.6.3 Digital output 1 on-delay
P2.5.6.4 Digital output 1 off-delay
P2.5.7.3 Digital output 2 on-delay
P2.5.7.4 Digital output 2 off-delay
With these parameters you can set on- and off-delays to digital outputs.
Signal
DO
Figure 7-11. Digital outputs 1 and 2, on- and off-delays
P2.5.6.5 Invert digital output 1
P2.5.7.5 Invert digital output 2
Inverts delayed digital output operation.
Signal
DO
P2.5.6.6 ID.Bit Free DO 1
P2.5.7.6 ID.Bit Free DO 2
Select the signal for controlling the DO. The parameter has to be set in format xxxx.yy
where xxxx is the ID number of a signal and yy is the bit number. For example, the value
for DO control is
is ON when bit number 02 of the warning word (ID no. 1174) i.e.
24-
ID487
ID488
ID491
ID492
On Off
Delay Delay
ID1587
On Off
Delay Delay
ID1217
ID1385
1174.02
. 1174 is the ID number of Warning Word 1. So the digital output
vacon • 131
Motor underload
is high.
6