Hitron CODA-4*8 Series DOCSIS User Manual page 89

Table 23: The Wireless: Basic Settings: 2.4G Screen (continued)
Wireless Mode
Channel Bandwidth
Wireless Channel
89 89
Version 1.0, 11/2016. Copyright
Version 1.0, 11/2016. Copyright
Hitron CODA-4x8x User's Guide
Select the type of 2.4GHz wireless network that you
want to use:
802.11 11b Only: use IEEE 802.11b.

802.11 g Only: use IEEE 802.11g.

802.11 b/g Mixed: use IEEE 802.11b and 802.11g.

802.11 n Only: use IEEE 802.11n.

802.11 g/n Mixed: use IEEE 802.11g and 802.11n.

802.11 b/g/n Mixed: use IEEE 802.11b, 802.11g

and 802.11n.
Only wireless clients that support the network protocol
you select can connect to the wireless network. If in
doubt, use 11b/g/n Mixed (default).
Use this field to configure the width of the radio channel
the CODA-4x8x uses to communicate with its wireless
clients (IEEE 802.11n only) on the 2.4GHz network.
Using the full 40MHz bandwidth can double your data
speed.
Select 20 MHz to only use a 20 megahertz band.

Select 20/40 MHz to use a 40 megahertz band

when possible, and a 20 megahertz band when a
40 megahertz band is unavailable.
Select the 2.4GHz wireless channel that you want to
use, or select Auto to have the CODA-4x8x select the
optimum channel to use.
NOTE: Use the Auto setting unless you have a specific
reason to do otherwise.
Click the Refresh button (
recheck the current wireless network conditions and
select the optimum 2.4GHz wireless channel afresh
(see Automatic Channel Selection
) to have the CODA-4x8x
on page 83).
2012 Hitron Technologies
2016 Hitron Technologies