Table of Contents
Advertisement
1.4.1
Manual IP Address Setup
By default, your CODA-4x8x's local IP address is 192.168.0.1. If your CODA-4x8x is
using the default IP address, you should set your computer's IP address to be
between 192.168.0.2 and 192.168.0.254.
Take the following steps to manually set up your computer's IP address to connect to
the CODA-4x8x:
NOTE:
This example uses Windows 7; the procedure for your operating system may
be different.
1
Click the Start Orb, then click Control Panel.
2
In the window that displays, double-click Network And Sharing Center.
3
In the left-hand panel, click Change Adapter Settings.
4
Right-click your network connection (usually Local Area Connection) and click
Properties.
5
In the Networking tab's This connection uses the following items list, scroll
down and select Internet Protocol (TCP/IPv4). Click Properties.
6
You can get an IP address automatically, or specify one manually:
If your network has an active DHCP server, select Get an IP address
automatically.
If your network does not have an active DHCP server, select Use the
following IP address. In the IP address field, enter a value between
192.168.0.2 and 192.168.0.254 (default). In the Subnet mask field, enter
255.255.255.0 (default). In the Default Gateway field, enter 192.168.0.1
(default).
NOTE:
If your CODA-4x8x is not using the default IP address, enter an IP address
and subnet mask that places your computer in the same subnet as the
CODA-4x8x.
7
Click OK. The Internet Protocol (TCP/IP) window closes. In the Local Area
Connection Properties window, click Close.
22
22
Version 1.0, 11/2016. Copyright
Version 1.0, 11/2016. Copyright
Hitron CODA-4x8x User's Guide
2012 Hitron Technologies
2016 Hitron Technologies
Advertisement
Table of Contents
