Table of Contents
Advertisement
Table 19:
The Basic: Port Triggering Add/Edit Screen
Protocol
Timeout (ms)
Apply
Close
4.6
The Basic: DMZ Screen
Use this screen to configure your network's Demilitarized Zone (DMZ).
Click Basic > DMZ. The following screen displays.
Figure 29:
The Basic: DMZ Screen
76
76
Version 1.0, 11/2016. Copyright
Version 1.0, 11/2016. Copyright
Hitron CODA-4x8x User's Guide
Use this field to specify whether the CODA-4x8x should
activate this trigger when it detects activity via:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Transmission Control Protocol and User Datagram
Protocol (Both)
NOTE:
If in doubt, leave this field at its default (Both).
Enter the time (in milliseconds) after the CODA-4x8x
opens the Target ports that it should close them.
Click this to save your changes to the fields in this
screen.
Click this to return to the Port Triggering screen without
saving your changes to the rule.
2012 Hitron Technologies
2016 Hitron Technologies
Advertisement
Table of Contents
