Chapter 2 Getting Started; Start Up The Device; Activate The Device - HIKVISION iDS-9632NXI-I8/16S User Manual

10 GROUND
11 AC 100V ~ 240V
12 Power Switch
13 Network Interfaces with
PoE function (supported
by
iDS-7700NXI-I4/16P/8S )

2.1 Start up the Device

Purpose
Proper startup and shutdown procedures are crucial to expanding the life of the device.
Before you start
Check that the voltage of the extra power supply is the same with the device's requirement, and
the ground connection is working properly.
Step 1 Connect the device power supply interface and electrical socket with delivered power cable. It
is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction
with the device. The Power button on the front panel should be red, indicating the device is
receiving the power.

2.2 Activate the Device

Purpose:
For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation. You can also activate the device via Web Browser, SADP or
Client Software.
Step 1 Input the same password in the text field of Create New Password and Confirm New Password.
You can click
Network Video Recorder User Manual

Chapter 2 Getting Started

to show the characters input.
Ground (needs to be connected when NVR starts
up).
100V to 240VAC power supply.
Switch for turning on/off the device.
Network interfaces for the cameras and to provide
power over Ethernet.
26