Assembly - HAMPTON BAY 68144 Use And Care Manual

Assembly - Attaching the Light Kit (continued)
2
Installing the bulbs and attaching the
glass bowl
CAUTION: Make sure the power is off before attaching or
removing the glass shade.
WARNING: Allow the bulb to cool completely before removing.
□
Remove the compressing ring (MM) from the threaded socket
of the light kit (G) by turning the compressing ring (MM)
counterclockwise until it unlocks.
□
Insert the glass shade (H) into the light kit cowling and turn
the compressing ring (MM) clockwise to tighten and secure
the glass shade. Repeat for the remaining shades.
□
With power off, screw the LED bulbs (K) into the sockets.
□
Attach the pull chain extensions (BB) to the light pull chain
and fan pull chain.
Assembly - Assembling the Fan without the Light Kit
1
Assembling the fan without light kit
□
Remove the three light kit mounting screws (QQ) on the side
of switch cup cover (L).
□
Position the switch cup cover (L) onto the switch cup. Make
sure the notch in the switch cup cover (L) clears the reversing
switch in the switch cup of the fan-motor assembly (F), and
reinstall the light kit mounting screws (QQ).
L
13
Please contact 1-855-HD-HAMPTON for further assistance.
F
G
H
MM
BB
K
F
QQ
HAMPTONBAY.COM