What's Included; Mounting Considerations - Globalstar Sat-Fi Quick Start Manual

WHAT'S INCLUDED

• Globalstar Sat-Fi Unit with Wi-Fi Antenna
• Globalstar External Antenna (one of the illustrated antennas)
• Globalstar Sat-Fi Power Supplies
- (1) 120-240VAC/12VDC Power Supply
- (1) 12VDC Car Power Adapter
- (1) Waterproof – DC Power Cable
• Accessory Kit (Located below the Sat-Fi Unit)
- (6) 3M Dual Lock Mounting Tape 5" (12 cm) Length
TM
- (4) 3M Bumpon Feet
TM
- (1) 14 ft/4.25 m Coaxial Antenna Cable
- (1) Rubber O-Ring
TELEPHONE NUMBER, ESN AND MDN LOCATION
If you forget your telephone number, ESN or MDN numbers,
they are conveniently located on the back of the Sat-Fi unit
and on your Sat-Fi outer box.
SAT-FI HARDWARE INSTALLATION
EXTERNAL SATELLITE ANTENNA INSTALLATION
The external satellite antenna is necessary for communication between the satellite and the Globalstar Sat-Fi unit.
The single most important consideration for a Sat-Fi installation is the location of the external satellite antenna. Sat-Fi
external satellite antennas need a clear and unobstructed view of the sky in all directions. It must be in a position
that minimizes obstructions that block the signal from the satellites and far enough away from other RF and GPS
devices to prevent interference (>3 feet/1m).

MOUNTING CONSIDERATIONS

• Mount the external antenna so that it has a 360 degree view of the sky
• Use only the coaxial cables that come with the antenna kit
- Do not cut or modify the coaxial antenna cable
- Do not kink the coaxial cables
- Extended coaxial cable lengths are available (sold separately)
• Use coaxial sealant, shrink-wrap tubing, or other suitable products to seal all external cable connections to prevent
moisture and corrosion damage
Marine Helix Antenna Helix Antenna
GAT-17MR
Te l N o : 000-000-0000
E S N 00000000000
M D N 0000000000
Magnetic
GAT-17HX Patch Antenna
GAT-17MP